Datalogger & VBus®-Accessories
VBus®/PWM interface adapter
The VBus® / PWM interface adapter enables the speed control of two high-efficiency
pumps even without an integrated PWM-output on the system`s controller. The
adapter is installed between the VBus® output of the controller and the PWM-input
of the high-efficiency pump, where it transforms the VBus® data packets into a 0-10 V
or a PWM signal.
Technical data
Power supply: mains adapter input voltage: 100 ... 240 V~ (AC) / 50-60 Hz
Adapter input voltage: 12 V (DC)
Housing: plastic
Display: 7-segment LED display
Protection type: IP 20 / IEC 60529
Dimensions: 95 x 70 x 25 mm
Power supply: mains adapter input voltage: 100 ... 240 V~ (AC) / 50-60 Hz
Adapter input voltage: 12 V (DC)
Housing: plastic
Display: 7-segment LED display
Protection type: IP 20 / IEC 60529
Dimensions: 95 x 70 x 25 mm
 The number of VBus® accessories that can be connected to one controller depends on the sum of their current consumption and on the current supply of the controller VBus®. |
|
|---|---|
| Device | Maximum current consumption |
| VBus®/PWM interface adapter | 6,5 mA |
| VBus®/USB interface adapter | 6,5 mA |
| VBus®/LAN interface adapter | 6,5 mA |
| Datalogger DL2 | 1,5 mA |
| Datalogger DL3 | VBus® 1-5: 10 mA VBus® 6: 0.5 mA |
| Smart Display SD3 | 17,5 mA |
| GA3 Large Display | 1 mA |
| AM1 alarm module | 16,5 mA |
| HKM3 | 1 mA |
| EM | 1 mA |
| STA-W | 12 mA |
VBus®
VBus®-converter to a PWM or 0-10V signal
Article-no: 180 008 60 | Price bracket B
89.00 €
The cTuVUS certification confirms that the controller meets the demands of the UL 60730-1A and CSA E60730.1 standards.
The cLCus certification confirms that the controller meets the demands of the UL 60730-2-9 and CSA - E60730-2-9-01 standards.
The cLCus certification confirms that the controller meets the demands of the UL 60730-1A and CSA E60730.1 standards.
