Datalogger & VBus<sup>®</sup>-accessories Datalogger & VBus®-accessories

DL3 Datalogger

Manuals available:
de en fr es it tr
  • Data logging and parameterisation of up to 6 VBus® master devices
  • Temperature measurement and logging - even without a controller
  • BACnet functionality
  • Integrated heat quantity measurement
  • Remote access to the system via the VBus.net visualisation portal
  • Comfortable system parameterisation via the RESOL RPT Parameterisation Tool possible
  • Firmware updates via Internet or SD card
  • Suitable for all RESOL controllers with VBus®
  • Connection of external energy meters (e.g. inverters) via S0 interface
rosenthal design
icon
www.VBus.net

DL3 Datalogger
Datalogger incl. RESOL Service CD, SD card, mains adapter, LAN and VBus® cable
Article-no: 180 009 90 | Price bracket A 672,00 €   Add to wish list

VBus
The number of VBus® accessories that can be connected to one controller depends on the sum of their current consumption and on the current supply of the controller VBus®.
Device Maximum current consumption
VBus®/PWM interface adapter 6,5 mA
VBus®/USB interface adapter 6,5 mA
VBus®/LAN interface adapter 6,5 mA
Datalogger DL2 1,5 mA
Datalogger DL3 VBus® 1-5: 10 mA
VBus® 6: 0.5 mA
KM1 Communication module 1,5 mA
Smart Display SDFK 25 mA
Smart Display SD3 17,5 mA
GA3 Large Display 1 mA
AM1 alarm module 16,5 mA
HKM3 1 mA
EM/EM HP 1 mA
STA-W 12 mA
WMZ 35 mA
WMZ G1 35 mA


The VBus®-Repeater amplifies the VBus® signal of a controller and supplies a current of 200 mA in total to modules connected.






Data logging with an extended range of functions
The DL3 Datalogger is used for logging data of up to 6 RESOL controllers and permits the visualisation via www.VBus.net and the parameterisation via RPT. Get a comprehensive overview of all controllers connected with the large full graphic display, all important settings are directly adjustable on the DL3. The integrated sensor and impulse inputs can measure and log temperatures – even without a controller. The DL3 is furthermore equipped with a BACnet functionality for BACnet conform transmission of data and can thus be used in a building management system.

Inputs: for 3 Pt500, Pt1000, KTY or impulse sensors, 1 current loop interface 0(4)-20 mA
Power supply:
input voltage of mains adapter: 100 ... 240 V~
rated current: 1 A
input voltage of datalogger: 12 V (DC)
Data interface: 6 x VBus® for the connection to the controller (slave), 1 x SD card slot, 1 x LAN (10 / 100), 1 x USB master
Housing: plastic, PC-ABS and PMMA
Mounting: wall mounting, mounting into patch panels possible
Indication/Display: full graphic display for status visualisation and operating control LED
Operation: 3 push buttons and 1 slide switch
Ingress protection: IP 20 / IEC 60529
Protection class: III
Ambient temperature: 0 ... 40 °C
Dimensions: 144 x 208 x 43 mm
Memory: 160 MB internal memory, with a logging interval of 5 min. sufficient for:
• 18 months for a system with one DeltaSol® MX, 3 EM, 3 heating circuits and 1 HQM
• 24 months for a system with one DeltaSol® MX, 1 EM and 1 heating circuit
• 30 months for a system with one DeltaSol® MX

Product photos

Datalogger DL3 (3084 kB)

Please note that RESOL – Elektronische Regelungen GmbH owns the sole copyright on objects, documents, graphics, pictures, audio and video documents, texts, etc. published and created by RESOL – Elektronische Regelungen GmbH. Copying, distribution to third parties, changing the contents or using these contents in electronic or printed publications is not permitted without the explicit approval of RESOL.

Customised and OEM versions are available on request. Please contact our sales team.
The cTuVUS certification confirms that the controller meets the demands of the UL 60730-1A and CSA E60730.1 standards.
The cLCus certification confirms that the controller meets the demands of the UL 60730-2-9 and CSA - E60730-2-9-01 standards.
The cLCus certification confirms that the controller meets the demands of the UL 60730-1A and CSA E60730.1 standards.