Tools & HE accessories

PSW Basic

The PSW Basic Pump signal converter is used for connecting speed-controlled high-efficiency pumps with a PWM or 0-10 V control input to a controller without a corresponding output. Thus, when replacing the pump, speed control can be enabled without replacing the controller. The PSW Basic is small, easy to install and simple to connect. It covers a large part of the most common signal combinations – it converts the signal of a speed-controlling semiconductor relay into either a PWM or a 0-10 V signal, both of those inverted if necessary.

Pump signal converter

Article no.: 180 010 50 | Price bracket B | Price on request

Add to wish list

For solar and heating pumps
PWM or 0-10 V output signal
Inversion of the output signal possible
Robust and dripping water protected housing
Compatible with all makes and models of pumps and controllers

Inputs: bursts, phase cutting
Outputs: PWM / 0-10 V
PWM frequency: 625 Hz ± 15 %
PWM voltage: 11 V
Power supply: 230 V~ (50 Hz)
Supply connection: type X attachment
Power consumption: max. 1,5 VA
Mode of operation: 1
Rated impulse voltage: 2.5 kV
Functions: signal converter, converting a speed-controlled 230 V signal into a PWM or 0-10 V signal
Housing: plastic, PC-ABS and PMMA
Mounting: Wall mounting
Ingress protection: IP 65 / DIN EN 60529
Protection class: II
Ambient temperature: 0 ... 40 °C
Pollution degree: 2
Dimensions: 80 x 80 x 53 mm
Humidity: 10 … 90 %
Maximum altitude: 2000 m above MSL
Overvoltage category: 2
Fuse: T0,2A