Valves
Euromix 3-port mixer
The Euromix 3-port mixer comes with a pre-mounted actuator and is available up to DN32.
¾" DN20
- Pre-mounted combination of mixing valve and actuator
- Easy to install and maintenance-free
- Available with different nominal widths and thread sizes
Actuator
Power supply: 230 V~ (+/- 10 %), 50 Hz
Power consumption: 3,5 VA
Ingress protection: IP 44
Protection class: II
Ambient temperature: 0 ... 55 °C
Runtime: 210 s, 90°
Torque: 8 Nm (max.)
Electrical connection: 3 x 0.5 mm², I = 2m
3-port mixing valve
Medium: water, glycol < 50 %
Connection thread: Rp 3/4"/Rp 1"/Rp 1 1/4"
Max. differential pressure: 1 bar
Leak rate: 0.2 % kvs (Δp = 1 bar)
Kvs: 7 m³/h / 10 m³/h / 10 m³/h (Δp = 1 bar)
O-rings: EPDM, FKM
Nominal size: DN20/DN25/DN32
Fluid temperature: 2 … 110 °C
Nominal pressure: PN10
Inlet: PPS
Mixer housing: brass (CW617N)
Shaft and bushing: brass (CW617N)
Power supply: 230 V~ (+/- 10 %), 50 Hz
Power consumption: 3,5 VA
Ingress protection: IP 44
Protection class: II
Ambient temperature: 0 ... 55 °C
Runtime: 210 s, 90°
Torque: 8 Nm (max.)
Electrical connection: 3 x 0.5 mm², I = 2m
3-port mixing valve
Medium: water, glycol < 50 %
Connection thread: Rp 3/4"/Rp 1"/Rp 1 1/4"
Max. differential pressure: 1 bar
Leak rate: 0.2 % kvs (Δp = 1 bar)
Kvs: 7 m³/h / 10 m³/h / 10 m³/h (Δp = 1 bar)
O-rings: EPDM, FKM
Nominal size: DN20/DN25/DN32
Fluid temperature: 2 … 110 °C
Nominal pressure: PN10
Inlet: PPS
Mixer housing: brass (CW617N)
Shaft and bushing: brass (CW617N)
