Multifunction controllers

DeltaSol<sup>®</sup> MX Plus Multifunction controller

DeltaSol^® MX Plus Multifunction controller

The DeltaSol^® MX Plus combines the functional range of the DeltaSol^® MX with an integrated Web server. Configuration, function control and access to VBus.net can be carried out easily and conveniently on any mobile device via a Web interface. Interfaces such as LAN and Modbus RTU (optional) as well as WLAN functionality and a WLAN access point offer many connectivity options.

Multifunction controller for solar and heating systems, incl. SD card

Article no.: 115 993 03 | Price bracket A | Price on request

Add to wish list

15 relay outputs and 15 inputs for Pt1000, Pt500 or KTY temperature sensors
Up to 5 extension modules via VBus^® (56 sensors and 40 relays in total)
Inputs for analogue and digital Grundfos Direct Sensors™ as well as for FRH and FRHd humidity sensors
Integrated control of up to 4 high-efficiency pumps via PWM. outputs
Cooling over the heating circuit with condensation detection
Dew point calculation by means of the FRH(d) humidity sensor to avoid condensation
Remote access to the heating circuits via the Web interface or room control unit(s)
Integrated Web server for configuration and function control
LAN interface, WLAN functionality, WLAN access point and optional Modbus RTU interface
Easy access to VBus.net via the Web interface
Operation via any mobile device

Heat pump demand (optional)


Comparison	DeltaSol^{^®} MX	DeltaSol^{^®} MX Plus

Inputs
Temperature sensor inputs	12	15
Impulse inputs	3	4
Frequency inputs	1	2
CS10 irradiation sensors	1	1
Analogue inputs for VFS/RPS Grundfos Direct Sensors™ or FRH humidity sensors	2	2
Digital inputs for VFD/RPD Grundfos Direct Sensors™ or FRHd humidity sensors	2	2
Input for central outdoor sensor unit	-	1
Outputs
Semiconductor relays	13	13
Potential-free relay	1	1
Potential-free low voltage relay	-	1
PWM outputs (convertible to 0-10 V signal outputs)	4	4
Interfaces
VBus^®
SD card slot
LAN	-*
WLAN	-*
Modbus/RTU	-
Communication protocols
Modbus/RTU	-
Modbus/TCP	-*
BACnet/IP	-*
Functions/Features (examples)
Extended optional functions, e.g. solid fuel boiler function with mixer and target temperature control
Cooling over the heating circuit with condensation detection
Dew point calculation by means of the FRH(d) humidity sensor to avoid condensation
Remote access to the heating circuits with room control unit(s) or the VBus^®Touch HC App
Heat pump demand (optional)
Web interface	-*
Single-value parameterisation via web interface	-

* in conjunction with a DL2 Plus Datalogger

Max. number of collector fields:

3¹

Max. number of stores:

5¹

Weather-compensated heating circuits:

2 (7²)

External heat exchanger:

Speed control of standard pumps:

Speed control of HE pumps:

■ via integrated PWM output:

■ via PSW adapter:

Temperature sensor inputs:

Sensor type:

Pt1000, Pt500, KTY

Inputs for Grundfos Direct Sensors™:

analog, digital

Input for CS10 irradiation sensor:

Impulse inputs for V40 flowmeter:

Relay outputs in total:

■ semiconductor relays (speed control):

13 (13)

■ electromechanical relay:

■ potential-free relay with changeover contact:

■ potential-free relay with normally open contact:

■ potential-free high-current relay:

PWM outputs:

■ convertible to 0-10 V:

Real-time clock:

Data interface:

RESOL VBus^®, SD card slot, 10 / 100 Base TX Ethernet, Auto MDIX, WLAN

Energy-efficient SMPS:

Power supply:

100 ... 240 V~

■ with flowmeter:

■ with V40 flowmeter:

■ with Grundfos Direct Sensors™:

VFS/VFD

Antifreeze function for solar circuit:

Collector minimum limitation:

Collector emergency shutdown:

Store maximum limitation:

Store set temperature:

Store emergency shutdown:

Drainback option:

Tube collector function:

■ with adjustable time frame, interval:

Additional ΔT control:

Thermostat function:

Target temperature:

Heat dump function:

Heat exchange:

Store loading in layers:

Priority loading:

■ Parallel loading:

■ Store sequence control:

■ Progressive loading:

■ Successive loading:

■ Spreaded loading:

Solar circuit bypass:

Irradiation-dependent bypass:

Irradiation switch:

Afterheating suppression:

Parallel relay:

solar, free selectable

Twin pump for solar circuit:

Cooling functions and cooling mode:

Flow rate monitoring:

Pressure monitoring:

Function control:

Error relay:

DHW hygiene functions:

■ DVGW legionella protection:

■ Thermal disinfection:

DHW heating:

Heating circuit return preheating:

Boiler loading/Zone loading:

Solid fuel boiler:

Mixer control weather-compensated:

Mixer control with target temperature:

Circulation:

Function block:

Heating circuit antifreeze function:

Chimney sweeper function for the heating circuit:

Room thermostats:

¹ system-dependent
² via EM Extension Module(s) in total

Inputs: 15 Pt1000, Pt500 or KTY temperature sensor inputs (can optionally be used for remote controls, operating mode switches or potentialfree switches), 4 impulse inputs for V40 flowmeters, 2 frequency inputs, 1 CS10 solar cell, 2 analogue inputs for VFS/RPS Grundfos Direct Sensors™ or FRH humidity sensors, 2 digital inputs for VFD/RPD Grundfos Direct Sensors™ or FRHd humidity sensors
Outputs: 15 relays, 13 of them semiconductor relays for pump speed control, 1 potential-free relay, 1 potential-free extra-low voltage relay and 4 PWM outputs (convertible to 0-10 V signal outputs)
PWM frequency: 512 Hz
PWM voltage: 10.5 V
Switching capacity:
1 (1) A 240 V~ (semiconductor relay)
4 (2) A 24 V ⎓ / 240 V~ (potential-free relay)
1 (1) A 30 V ⎓ (potential-free relay)
Total switching capacity: 6.3 A 240 V~
Power supply: 100 – 240 V~ (50 – 60 Hz)
Supply connection: X
Standby: 0.82 W
Temperature controls class: VIII
Energy efficiency contribution: 5 %
Mode of operation: type 1.B.C.Y action
Rated impulse voltage: 2,5 kV
Data interface: RESOL VBus^®, SD card slot, 10 / 100 Base TX Ethernet, Auto MDIX, WLAN 2.4~2.4835 GHz, Modbus RTU (optional)
Communication protocols: Modbus/RTU, Modbus/TCP and BACnet/IP
VBus^® current supply: 35 mA
Functions: integrated Web server for configuration and function control, 7 integrated calorimeters, control of weather-compensated heating circuits. Adjustable system parameters and add-on options (menu-driven), balance and diagnostics functions, function control according to VDI 2169
Housing: plastic, PC-ABS and PMMA
Mounting: wall mounting, mounting into patch panels is possible
Indication/Display: full graphic display
Operation: 7 buttons, via the Web interface on the mobile device
Ingress protection: IP 20 / DIN EN 60529
Protection class: I
Ambient temperature: 0 … 40 °C
Pollution degree: 2
Dimensions: 253 x 258 x 47 mm
Radiated power: < 100 mW
Maximum altitude: 2000 m above MSL
Fuse: T6.3A
WLAN encryption: WPA / PSK, WPA2 / PSK
Relative humidity: 10 … 90 %