Immersion sleeves
Because of the short component length, it is
recommended to use the immersion sleeve TH30
with the temperature sensor FKP5,5 or FRP5,5.
Advice:
Standard-screw connection thread of the immersion sleeves ½"
Attention:
In case of domestic water installations only use stainless steel immersion sleeves.
Advice:
Standard-screw connection thread of the immersion sleeves ½"
Attention:
In case of domestic water installations only use stainless steel immersion sleeves.
TH30
NPT versions available Upon request
 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| DA [mm] | DI [mm] | L1 [mm] | L2 [mm] | G [mm] | Material | Art. no. | ||||
| TH30 | 9 | 6,4 | 30 | 23 | ½ | Brass/Copper nickel-plated | 280 005 60 | |||
| TH45 | 10 | 6,4 | 45 | 23 | ½ | Brass/Copper nickel-plated | 280 000 30 | |||
 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| DA [mm] | DI [mm] | L1 [mm] | L2 [mm] | G [mm] | Material | Art. no. | ||||
| TH60 | 8 | 6,4 | 60 | 23 | ½ | Brass/Copper nickel-plated | 280 000 40 | |||
| TH100 | 8 | 6,4 | 100 | 23 | ½ | Brass/Copper nickel-plated | 280 000 50 | |||
| TH150 | 8 | 6,4 | 150 | 23 | ½ | Brass/Copper nickel-plated | 280 000 60 | |||
| TH200 | 8 | 6,4 | 200 | 23 | ½ | Brass/Copper nickel-plated | 280 000 70 | |||
| TH300 | 8 | 6,4 | 300 | 23 | ½ | Brass/Copper nickel-plated | 280 000 90 | |||
Technical data
| Brass/Copper nickel-plated | |
| Material | Copper, Surface nickel-plated (Pipe), Brass MS 58, Surface nickel-plated (External thread, Pressure screw), Silicone (Sealing ring) |
| Pipe | 8 x 0,8 mm |
| Width across flats | SW22 |
| Pressure screw | M12 x 1.5 – SW12 |
| Sealing ring | 10 x 5 x 6 mm |
| Max. operating pressure | +150°C |
| Pressure | Test pressure : 15 bar Nominal pressure: 15 bar |
 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| DA [mm] | DI [mm] | L1 [mm] | L2 [mm] | G [mm] | Material | Art. no. | ||||
| TH30V | 8 | 6,4 | 30 | 23 | ½ | Stainless steel | 280 012 30 | |||
| TH45V | 8 | 6,4 | 45 | 23 | ½ | Stainless steel | 280 010 20 | |||
| TH60V | 8 | 6,4 | 60 | 23 | ½ | Stainless steel | 280 001 00 | |||
| TH60V/4 | 5 | 4,2 | 60 | 23 | ½ | Stainless steel | 290 002 20 | |||
| TH100V | 8 | 6,4 | 100 | 23 | ½ | Stainless steel | 280 002 10 | |||
| TH100V/4 | 5 | 4,2 | 100 | 23 | ½ | Stainless steel | 290 002 30 | |||
| TH150V | 8 | 6,4 | 150 | 23 | ½ | Stainless steel | 280 002 20 | |||
| TH200V | 8 | 6,4 | 200 | 23 | ½ | Stainless steel | 280 002 30 | |||
Technical data
| Stainless steel | |
| Material | Stainless steel 1.4404 (Sleeve body), Stainless steel 1.4305 (Screw-in head) |
| Width across flats | SW24 |
| Druckschraube (inkl. Silikondichtung) | SW12 |
| Max. operating pressure | +150°C |
| Pressure range | ≤ 40 bar |