VA32 3-port motor-driven valve
Notice
This product is no longer available! Please contact our sales team or technical support to enquire about alternative products.
Application area:
The 3-port motor-driven valve VA32 is used in solar and heating systems, in which smaller parts of systems can be separately controlled or single equipment can be switched on or off.
Characteristics:
Compact size, modern design, insulated actuator housing. Simple manual operation for commissioning or emergency operation. Electrical universal connection by integrated relay. The control is effected by an on-off contact. The limit switch signal output can be used for control purposes (max. 1 A). Position of the ball valve is visible with the indicator flag (white). The actuator can be quickly replaced without disassembly of the valve. No flow reduction, full flow according to the versions DN20-DN32.
The 3-port motor-driven valve VA32 is used in solar and heating systems, in which smaller parts of systems can be separately controlled or single equipment can be switched on or off.
Characteristics:
Compact size, modern design, insulated actuator housing. Simple manual operation for commissioning or emergency operation. Electrical universal connection by integrated relay. The control is effected by an on-off contact. The limit switch signal output can be used for control purposes (max. 1 A). Position of the ball valve is visible with the indicator flag (white). The actuator can be quickly replaced without disassembly of the valve. No flow reduction, full flow according to the versions DN20-DN32.
VA32 3-port motor-driven valve
Power consumption:
Relay on, motor running: 9 VA
Relay on, motor in standby: 5 VA
Relay off: 0 VA
Relay on, motor running: 9 VA
Relay on, motor in standby: 5 VA
Relay off: 0 VA
Ingress protection: IP 44
Ambient temperature: -10 °C ... +60 °C
Load for limit switch: 5 (1) A, 240 V~
Actuation time: 18 s / 90 °
Operation mode: open - closed
Protection class: IP 44 / IEC 60529
Electrical connection: 4 x 0.5 mm², L = 2.0 m
Limit switch: 5 (1)A, 240 VA
Regulating angle: 90 °
Operating voltage: 230 V~
Torque: 6 Nm (max. 8 Nm)
Insulation class:
Output signal: Phase L, 1 (1) A