Valves
MA10/25 DHW thermostatic mixing valve
Thermostatic mixing valve for installation into hot water circuits as
scald protection.
The thermostatic mixing valve MA10/MA25 is used for limiting the hot water
temperature, e. g. in thermosiphon systems or in solar potable water systems.
H = hot water connection | C = cold water connection | M = mixed water outlet
Scald protection for potable water and DHW systems
- No auxiliary electric energy required
- Continuously adjustable between 35 ... 65 °c
- Installation in the hot water fl ow, in systems with stub or circulation pipes
- Screwed or soldered connections possible
- Any installation position possible
Housing:
dezincification-resistant brass
Adjustment range: 35 ... 65 °C
Guide components: PTFE
Internal seal: EPDM
External seal: asbestos-free, flat-sealing
Operating pressure: max. 10 bar
Max. hot water temperature: max. 90 °C
Connections: CuZn39Pb3 (2.0401)
Adjustment range: 35 ... 65 °C
Guide components: PTFE
Internal seal: EPDM
External seal: asbestos-free, flat-sealing
Operating pressure: max. 10 bar
Max. hot water temperature: max. 90 °C
Connections: CuZn39Pb3 (2.0401)
 |
||||
|---|---|---|---|---|
| MA10 | MA10 | MA25 | MA25 | |
| A | R ¾" | G1 | R ¾" | G1 |
| B | 149 mm | 115 mm | 161 mm | 121,5 mm |
| C | 81,5 mm | 47,5 mm | 89,5 mm | 50 mm |
| D | 70 mm | 36 mm | 78 mm | 38,5 mm |
Reducing bushes
OT ¾", Set of 3 units for MA10
