Datalogger & VBus®-accessories
KM2 Communication module
The KM2 Communication module is the ideal interface between a solar or heating controller and the Internet. Due to the easy and secure connection to the VBus.net Internet portal, system data can be visualised and for example reports on system status via e-mail made available. With the RESOL RPT Parameterisation Tool the controller can be parameterised over the Internet.
DL2 Plus Datalogger
The DL2 Plus Datalogger is the interface between 2 RESOL controllers and the Internet and additionally permits logging of system data. It offers WLAN functionality and enables the easy and secure access to the system data via www.VBus.net. For the connection of one controller to a building management system, the DL2 Plus is also equipped with a VBus® channel with BACnet or Modbus functionality.
VBus®/USB interface adapter
The VBus®/USB interface adapter is the interface between the controller and a personal computer. With its standard mini USB port it enables a fast transmission of system data for processing, visualising and archiving as well as the parametrisation of the controller via the VBus®. The RESOL Servicecenter software is included.
SD3 Smart Display
The RESOL Smart Display is designed for simple connection to RESOL controllers with VBus®. It is used for visualising data issued by the controller: collector temperature, store temperature and energy yield of the solar thermal system. The use of high-efficient LEDs and filter glass assures a high optical brilliance and good readability. An additional power supply is not required.
AM1 Alarm module
The Alarm module AM1 is designed to signal system failures. It is to be connected to the VBus® of the controller and issues an optical signal via the red LED if a failure has occurred. The AM1 also has a potential-free relay output, which can e. g. be connected to a building management system (BMS). So that a collective error message can be issued in the case of a system failure. Thus, the reliability and the stable yield of the system are ensured.
Smart Display SDFK
The RESOL Smart Displays SD3 and SDFK are used for visualising data issued by the controller. The Smart Display SD3 indicates the collector temperature, the store temperature and the energy yield of the solar thermal system. In the heating area, the Smart Display SDFK indicates the solid fuel boiler temperature and the bottom/top store temperatures as well as the pump status. Both Smart Displays are designed for simple connection to RESOL controllers with VBus®. An additional power supply is not required.
