Datalogger & VBus®-accessories
DL3 Datalogger
Data logging with an extended range of functions
The DL3 Datalogger is used for logging data of up to 6 RESOL controllers and permits the visualisation via www.VBus.net and the parameterisation via RPT. Get a comprehensive overview of all controllers connected with the large full graphic display, all important settings are directly adjustable on the DL3. The integrated sensor and impulse inputs can measure and log temperatures – even without a controller. The DL3 is furthermore equipped with a BACnet functionality for BACnet conform transmission of data and can thus be used in a building management system.
Datalogger incl. RESOL Service CD, SD card, mains adapter, LAN and VBus® cable
- Data logging and parameterisation of up to 6 VBus® master devices
- Temperature measurement and logging - even without a controller
- BACnet functionality
- Integrated heat quantity measurement
- Remote access to the system via the VBus.net visualisation portal
- Comfortable system parameterisation via the RESOL RPT Parameterisation Tool possible
- Firmware updates via Internet or SD card
- Suitable for all RESOL controllers with VBus®
- Connection of external energy meters (e.g. inverters) via S0 interface
Inputs:
for 3 Pt500, Pt1000, KTY or impulse sensors, 1 current loop interface 0(4)-20 mA
Power supply:
input voltage of mains adapter: 100 ... 240 V~
rated current: 1 A
input voltage of datalogger: 12 V (DC)
Data interface: 6 x VBus® for the connection to the controller (slave), 1 x SD card slot, 1 x LAN (10 / 100), 1 x USB master
Housing: plastic, PC-ABS and PMMA
Mounting: wall mounting, mounting into patch panels possible
Indication/Display: full graphic display for status visualisation and operating control LED
Operation: 3 push buttons and 1 slide switch
Ingress protection: IP 20 / IEC 60529
Protection class: III
Ambient temperature: 0 ... 40 °C
Dimensions: 144 x 208 x 43 mm
Memory: 160 MB internal memory, with a logging interval of 5 min. sufficient for:
• 18 months for a system with one DeltaSol® MX, 3 EM, 3 heating circuits and 1 HQM
• 24 months for a system with one DeltaSol® MX, 1 EM and 1 heating circuit
• 30 months for a system with one DeltaSol® MX
Power supply:
input voltage of mains adapter: 100 ... 240 V~
rated current: 1 A
input voltage of datalogger: 12 V (DC)
Data interface: 6 x VBus® for the connection to the controller (slave), 1 x SD card slot, 1 x LAN (10 / 100), 1 x USB master
Housing: plastic, PC-ABS and PMMA
Mounting: wall mounting, mounting into patch panels possible
Indication/Display: full graphic display for status visualisation and operating control LED
Operation: 3 push buttons and 1 slide switch
Ingress protection: IP 20 / IEC 60529
Protection class: III
Ambient temperature: 0 ... 40 °C
Dimensions: 144 x 208 x 43 mm
Memory: 160 MB internal memory, with a logging interval of 5 min. sufficient for:
• 18 months for a system with one DeltaSol® MX, 3 EM, 3 heating circuits and 1 HQM
• 24 months for a system with one DeltaSol® MX, 1 EM and 1 heating circuit
• 30 months for a system with one DeltaSol® MX
Accessories
CS-I Global irradiation sensor
4-20 mA output signal, sensor incl. mains adapter, connection box and mounting material
